image
image
image

 


image

 **Please click here to review our shipping rates & policies.**

                      

T-Bars

Click here to go back to Driftmaster menu page.

Stainless Steel Mounting Hardware
(Truss-head Phillips)
Not furnished with bases except where noted.

Item #

Includes:

Screws #800

1) 1/4" x 1-1/4" Truss Head S.S. Screw

*Bolts #810

1) 3/16" x 2" S.S. bolt
& 1) S.S. flange nut*

*Bolts #820

1) 1/4" x 1-3/4" S.S. bolt
& 1) S.S. flange nut*

*Use bolts for through-bolting star bases when extreme stress is anticipated or on thin aluminum boats. 

Choose screw or bolts

T-500-H
US Patent # 7,640,692 B1

Sometimes you just don't have room to mount a "H" frame trolling rack like our T6000, T-5100, or T-5000 systems.  We are now offering a heavy T-bar system for big fish.  The T-500-H will allow you to put a 'two rod' system in tight places on your boat.  Like all of our systems, it's easily removed when not in use.  The T-500-H includes locking pins on the top bar to secure your rod holders in an upright position.  The Pro Series Duo rod holders will provide two rod angles in the 'locked' position. Slide the clamp bases inward, disengaging the lock pins, for unlimited rod adjustment.  The T-500 is one more option Driftmaster offers for you to customize your fishing platform.

T-500H Big Fish T-Bar

T-500-H Big Fish T-Bar
12" Tall X 16" Wide
Includes:
(2) #255-H Duo Rod Holders
(2) #205-B 1" Pro Clamp Bases
Mounts to #T250-B Base
3" Square Flush Stainless

 


T-250-H
US Patent# 7 640 692 B1

  • Unique Patented Design Utilizes A Super Strong 1 1/2" Diameter Tube For The Vertical Stem.
  • Unlimited Rod Adjustment
  • Easy To Turn Out Of The Way Of Trolling Motors Or Walk Ways Then Turn Back And Tighten Securely To Get Back To Fishing.
  • Can Be Removed And Disassembled For Storage In About Ten Seconds.
  • Polished Stainless Base Mounts Flush And Secures With Four Screws For Strength
  • Polished Stem And T-Bar Means  Your System Will Look As Good As It Works.

 

T-250-H T-Bar

Equipped with Li'l Pro rod
holders is designed for spider
rigging (slow trolling jigs or
minnows).  The Li'l Pro rod
holders offer the versatility
of side trolling as well because
of the "U" shaped front.


T-250-HC
US Patent# 7 640 692 B1

The Gun Slingers were designed with the help of 6 time national champion Ronnie Capps to be the ultimate setup for tight-lining or slow trolling for Crappie.  The "V" shaped front allows hook sets against the fish.  If the fish is taking your bait left, you set the hook to the right. This technique can increase hook sets by 15%.  Gun Slingers also have a wider cradle for easy access and super fast hook sets.  Because of the "V" shaped front, this model is
not suitable for side trolling, but If tight-lining is you method, this is your system!

T-250-HC T-Bar

Includes (4) #2100-H Gun Slinger Rod Holders


T-150-H

Tube Style Rod Holders On Center Consoles Now Have A Purpose!  To Hold A Driftmaster!

  • Fully adjustable rod angle

  • Fits into flush mount rod holders
  • Fully adjustable rod angle
  • Designed for trolling or bait fishing
  • Adjusts to 2 positions: troll to rear or drift to side of boat
  • Includes two 205B Pro bases
  • Includes two Pro Duo rod holders.

T-150-H T-Bar


FT-18-H holds 4 rods
US Patent# 6 213 441 B1


Mount #200-B Star Base permanently to boat, and T-bar system can be attached or removed in seconds.

  • Fully adjustable side to side for fishing multiple rods
  • Use with any Li'l Pro Series rod holder (furnished with #210-H Rod Holders)
  • Cost less - If you don't need vertical rod adjustment, this is your system
  • (4) #210-H Rod Holders
  • (1)  18" Long / 1 1/2" Wide Flat Bar
  • (1)  10"  Locking Stem / #200-B Base and Mounting Screws

 

FT-18-H T-Bar


FT-09-H holds 2 rods
US Patent# 6 213 441 B1


Mount #200-B Star Base permanently to boat, and T-bar system can be attached or removed in seconds.

  • Fully adjustable side to side for fishing multiple rods
  • Use with any Li'l Pro Series rod holder (furnished with #210-H Rod Holders)
  • Cost less - If you don't need vertical rod adjustment, this is your system
  • 2 #210-H Rod Holders
  • 1  7" Long / 1 1/2" Wide Flat Bar
  • 1  10"  Locking Stem / #200-B Base and Mounting Screws

 

FT-09-H T-Bar


T-118-H holds 4 rods
US Patent# 6 213 441 B1


Mount #200-B Star Base permanently to boat, and T-bar system can be attached or removed in seconds.

  • 10" tall X 1/2" diameter vertical stem fits #200-B star base (included)
  • Full horizontal and vertical adjustment
  • Stem-lock sprocket locks T-Bar in 12 horizontal positions
  • Available for 2 rods or 4
  • Locking stem makes these suitable for heavy trolling as well as spider rigging.
  • 4 #210-H Rod Holders
  • 4 #214-B Bases
  • 1  24" Long / 7/8 Dia. Round T-Bar
  • 1  10"  Locking Stem / #200-B Base and Mounting Screws

 

T-118-H T-Bar


T-009-H holds 2 rods
US Patent# 6 213 441 B1


Mount #200-B Star Base permanently to boat, and T-bar system can be attached or removed in seconds.

  • 10" tall X 1/2" diameter vertical stem fits #200-B star base (included)
  • Full horizontal and vertical adjustment
  • Stem-lock sprocket locks T-Bar in 12 horizontal positions
  • Available for 2 rods or 4
  • Locking stem makes these suitable for heavy trolling as well as spider rigging.
  • 2 #210-H Rod Holders
  • 2 #214-B Bases
  • 1    9" Long / Round T-Bar
  • 1  10"  Stem / #200-B Base and Mounting Screws

 

T-009-H T-Bar


Call or email for details.

 

 


FT-18 holds 4 rods
US Patent# 6 213 441 B1


Mount #200-B Star Base permanently to boat, and T-bar system can be attached or removed in seconds.

T-Bar and Base only,
no rod holders included!

Price: $33.95 ea.


Call or email for details.

 

 


#2150 For deck or gunnel mounts.

2150 Tip Saver

  • Avoid tangled lines and broken tips

  • Holds 8 rods
  • 4 sections for rod butts (2 per slot), 8 sections for tips (1 per slot)
  • Organizes rods too long for storage boxes
  • 4" stems are standard, but also available with 8" stems

 

Please select 4 in or 8 in shaft:



#2160 For gunnel mounts
can be swung out over water.

2160 Tip Saver

  • Avoid tangled lines and broken tips

  • Holds 8 rods
  • 4 sections for rod butts (2 per slot), 8 sections for tips (1 per slot)
  • Organizes rods too long for storage boxes
  • 4" stems are standard, but also available with 8" stems

Please select 4 in or 8 in shaft:

Click here to go back to Driftmaster menu page.


image
image
image