Driftmaster Pro Series Rod Holder Bases 204-B 204-BL 205-B and 205-BL Round Rail Clamp with set screw
Driftmaster Pro Series Rod Holder Bases 204-B 204-BL 205-B and 205-BL Round Rail Clamp with set screw
Two Models available for either 7/8" or 1" round rails. Rod Angle can easily be adjusted by loosening one nut and turning base on rail.
(Hardware included.) (Sold individually, use drop down menu to select options)
Round Rail Clamp Base for Pro Series 1/2" stem rod holders with set screw.
Available in Right and Left hand threads.
SC204-B= 7/8" Rail Right Threads
SC204-BL= 7-8" Rail Left Threads
SC205-B= 1" Rail Right Threads
SC205-B=1" Rail Left Threads
Item #'s ending in "L" are left-hand thread (examples = 255-HL or 200-BL). Right-hand thread items are for use on the right side of the boat and left-hand thread products are for use on the left side of the boat. Why do we offer the option of right or left-threads?
As rigs are pulled toward the rear of the boat (either casted or being trolled) You want to keep the pressure always tightening the threads. If a rod holder were to not be completely tightened during installation, the pressure could loosen right-hand threads if installed on the left side of the boat (if not tightened properly). Using left-thread on the left side of the boat means the rod holder is being tightened as it is pulled toward the rear of the boat.
Right-hand threads install and tighten clockwise, left-hand threads install and tighten counter clockwise. Using the correct right-hand and left-hand products are important for applications in which the rod holders will be removed from the mount frequently, which can lead to them accidentally not being tightened properly upon reinstallation.
Note: Right-hand thread rod holder require right-thread bases, Left-thread rod holders require left-thread bases. Driftmaster Pro Series Rod Holder Bases 204-B 204-BL 205-B and 205-BL Round Rail Clamp with set screw
Please don't hesitate to contact us with any questions you may have. We will be happy to help you in rigging your boat and getting you the right products to do it right for your needs.
Remember all Driftmaster Pro Series Rod Holder Bases 204-B 204-BL 205-B and 205-BL Round Rail Clamp with set screw are made in the USA and guaranteed for life against breakage! You will not break these rod holders!
Driftmaster, You Fight The Fish, Not The Rod Holder!
The harder a fish pulls, the tighter the rod is held. There is never any slack line ... just remove the rod from the holder by lifting the rod tip ... the hook is set instantly and automatically.
Driftmaster Pro Series Rod Holder Bases 204-B 204-BL 205-B and 205-BL Round Rail Clamp with set screw
| Select Model | Thread |
Right Hand Thread 1" Rails, Right Hand Thread 7/8", Left Hand Thread1" Rails, Left Hand Thread 7/8" Rails |
|---|