Ironwood Pacific Anchorlift Anchor Puller with Standard Buoy
$75.95 USD $62.95 USD
AnchorLift is ideal for anchoring in lakes and rivers with anchor lines that are rigged with under 15 feet of chain. The chain will not thread through the AnchorLift body. It's also an excellent way to easily pull up shrimp or crab pots rigged with nylon or polypropylene line.
WARNING: This product can expose you to chemicals including Lead and Nickel, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to:
www.P65Warnings.ca.gov
Ironwood Pacific Anchorlift Anchor Puller with Standard Buoy
The Ironwood Pacific Anchorlift Anchor Puller with Standard Buoy is designed to make raising your anchor easy. Simply start your engine and motor forward to raise your anchor. The Ironwood Pacific Anchorlift Anchor Puller is ideal for anchoring in lakes and rivers with anchor lines that are rigged with less than 15 feet of chain. The chain will not thread through the AnchorLift body. It's also an excellent way to easily pull up shrimp or crab pots rigged with nylon or polypropylene line.
Key Features of Ironwood Pacific Anchorlift Anchor Puller with Standard Buoy
The AnchorLift has a tough nylon body reinforced with stainless steel at the wear points
Smooth, radiused ends prevent anchor line wear
Will raise anchors up to 28 lbs using 3/8" to 5/8" anchor line
Stainless steel sliding bolt locks anchor at the surface
Ideal for river and lake anchoring
Can be used with crab and shrimp pots
Lifetime Warranty
Made in the USA
Also available in pro model with 14.5 inch buoy: Click here!
How Does The Ironwood Pacific Anchorlift Anchor Puller with Standard Buoy Work?
1. Attach AnchorLift™ to the
bottom of a buoy. Then slide
AnchorLift over your anchor line,
anchor as normal, and drop
AnchorLift into the water.
2. When you are ready to
raise your anchor, simply
motor forward around your
anchor to break your anchor
free.
3. Continue motoring forward to pull
your anchor to the surface. The
AnchorLift sliding bolt will lock the
anchor in place when it reaches the
surface for easy retrieval.
https://www.youtube.com/watch?v=3Cdg7md_Pt0
Q. What size rope or anchor line will work with the AnchorLift and AnchorLift Pro?
3/8” to 5/8” is recommended.
Q. What materials are the AnchorLift and AnchorLift Pro constructed from?
The AnchorLift is made from marine-grade nylon that has stainless steel reinforcements at all wear points for added durability. The AnchorLift Pro is made from high strength aluminum and has an anodized finish for corrosion resistance. Both models have stainless steel hardware.
Q. What size buoy do I need to raise my anchor with the AnchorLift?
A buoy’s lifting capacity should be higher than the weight of your anchor. Using a larger sized buoy is fine and will raise your anchor faster by increasing the amount of resistance to pull against.
Q. What kind of buoy comes with my anchor puller?
Both the AnchorLift and AnchorLift Pro can be purchased with or without buoys. The buoys we sell are the A Series buoy made by Polyform which have a limited lifetime warranty. You can go to http://www.polyformus.com for more information on the buoys.
Q. What is the AnchorLift warranty?
Limited lifetime warranty on both the AnchorLift body and Polyform buoy are standard.
Q. How do I know if I need the AnchorLift or Anchor Ring anchor puller?
The AnchorLift is designed to work with an all rope rode. The Anchor Ring is suggested to be used when you have a rode with at least 15 feet of chain.
Q. What are the benefits of the AnchorLift Pro?
The AnchorLift Pro is designed for heavy-duty applications and rigorous conditions. Aluminum anodized body is virtually indestructible.
Q. Can the Ironwood Pacific Anchorlift Anchor Puller with Standard Buoy be used along with an anchor winch or windlass? Not recommended. The purpose of the AnchorLift is to do the job of a winch or windlass when they are not practical options.
AnchorLift Disclaimer
Always operate vessel in accordance with Coast Guard and other applicable regulations and guidelines.
Use extreme caution when anchoring in moving water and when letting out and retrieving the anchor line.
Always keep your anchor line free of tangles and away from the propeller.
Do not use where loss of property or safety may be at risk.
Anchoring your boat with the AnchorLift system
Slide the AnchorLift over the end of the anchor line, threading the line under the bolt.
Knot the anchor line near its end and fasten the line to your boat.
Release the anchor by sliding the bolt to the up position, allowing the anchor line to slide through the AnchorLift.
When the anchor and boat are in the desired position, toss the AnchorLift into the water.
To raise your anchor
With the Ironwood Pacific Anchorlift Anchor Puller with Standard Buoy on your anchor line, motor your boat forward around the anchor, taking care to keep the anchor line clear of the prop.
Proceed slowly – at roughly 5 knots – until the anchor has released from the bottom, then increase speed slightly – 6 to 8 knots. Do not continue forward if the anchor does not break free.
The Anchor line will slide through the AnchorLift and float the anchor to the surface.
When the anchor reaches the surface, shift into neutral and pull in the slack anchor line.
Ironwood Pacific Anchorlift Anchor Puller with Standard Buoy
